All Products
-
Cylindrical Roller Bearings
-
Spherical Roller Bearings
-
Rolling Mill Bearings
-
Excavator Bearings
-
Angular Contact Ball Bearings
-
Deep Groove Ball Bearings
-
Split Bearings
-
Plummer Block Housings
-
Taper Roller Bearings
-
Ball Screw Support Bearings
-
Automobile Bearings
-
Spherical Plain&Rod End Bearings
-
CARB Bearings
-
Needle Roller Bearings
-
Thrust Taper&Spherical Roller Bearings
-
Concrete Mixer Truck Bearings
-
3200&3300 double row angular contact ball bearings
-
Self-aligning Ball Bearings
-
Cylindrical roller bearings for oilfield
-
Double row cylindrical roller bearings
-
Brand Bearings
-
Mud pump bearings
-
Insocoat Bearings
-
Track Rollers
Contact Person :
Bruce
WhatsApp :
+(86)18864882435
Medium induction heater with a 120 kg bearing heating capacity TIH100m

Contact me for free samples and coupons.
WhatsApp:0086 18588475571
Wechat: 0086 18588475571
Skype: sales10@aixton.com
If you have any concern, we provide 24-hour online help.
xProduct Details
Max. Bearing Weight | 120 Kg (264 Lb) | Voltage 1 | 200–240 V/50–60 Hz/TIH 100m/230 V |
---|---|---|---|
Temperature Control | 20 To 250 °C (68 To 482 °F) | Time Control (minutes) | 0–60 |
Max. Heating Temperature 2) | 250 °C (482 °F) |
Product Description
Medium induction heater
High heating capacity of up to 120 kg bearing
The medium induction heater TIH 100m has the same high standards of efficiency and performance as the smaller heaterTIH 030m, combined with increased capacity. The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...m range.
Placing the induction coil outside the heater’s housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz or 400-460V/50-60Hz.
Placing the induction coil outside the heater’s housing allows the heating of bearings weighing up to 120 kg (264 lb). The heater is equipped with thermal overheating protection to reduce the risk of damage to the induction coil and the electronics. In addition to temperature mode, the TIH 100m is equipped with a time mode for heating components other than bearings. The heater is supplied standard with three yokes and is available in two executions: 230V/50-60Hz or 400-460V/50-60Hz.
Features and benefits

- Standard swivel arm for large size yoke
- Capable of heating a 97 kg (213 lb) bearing in less than 20 minutes, saving time and energy
- 2-step power setting and smaller yokes allow heating smaller bearings safely and at lower power consumption
- Temperature mode pre–set at 110 °C (230 °F) to help prevent bearing over–heating
- Automatic demagnetisation
Technical data | |
Designation | TIH 100m |
m20 performance | 97 kg (213 lb) |
Voltage, V/Hz | |
- TIH 100M/230V - TIH 100M/MV |
230V/50-60Hz 400-460V/50-60Hz |
Bearing: | |
- Maximum weight | 120 kg (264 lb) |
- Maximum bore diameter | 20 - 400 mm (0.8 - 15.7 in.) |
Temperature control: | |
- Range | 0 - 250 °C (32 - 482 °F) |
- Magnetic probe | Yes, K-type |
- Accuracy (electronics) | ± 2 °C (± 3,6 °F) |
Time control: | |
- Range | 0 - 60 minutes |
- Accuracy | ± 0,01 sec. |
Maximum heating temperature* | 250°C (482 °F) |
Thermometer mode | Yes |
Bearing mode | Yes |
Power reduction | 2-step; 50 - 100% |
Demagnetisation according to norms (automatic) |
Yes (<2 A/cm) |
Can heat sealed bearings | Yes |
Can heat pre - greased bearings | Yes |
Error guiding codes | Yes |
Thermal overload protection | Yes |
Maximum magnetic flux | 1,7 T |
Control panel | Key board with LED in remote control |
Operating area (w × h) | 155 × 205 mm (6.1 × 8.0 in.) |
Coil diameter | 110 mm (4.3 in.) |
Dimensions (w × d × h) | 570 × 230 × 350 mm (22.4 × 9.0 × 13.7 in.) |
Total weight, including yokes | 42 kg (92 lb) |
Maximum power consumption | 3,6 kVA (230V) |
4,0-4,6 kVA (400-460V) | |
Number of standard yokes | 3 |
Standard yokes | 56 × 56 × 296 mm (2.2 × 2.2 × 11.7 in.), for heating bearings with bore diameter of 80 mm (3.1 in.) and larger |
28 × 28 × 296 mm (1.1 × 1.1 × 11.7 in.), for heating bearings with bore diameter of 40 mm (1.6 in.) and larger |
|
14 × 14 × 296 mm (0.6 × 0.6 × 11.7 in.), for heating bearings with bore diameter of 20 mm (0.8 in.) and larger |
|
Core cross section | 56 × 56 mm (2.2 × 2.2 in.) |
Yoke storage | Yes, foldable |
Sliding arm | No |
Swivel arm | Yes, large yoke only |
Cooling fan | No |
Housing material | Steel and glass filled polyamide |
* Depending on bearing or work piece weight. For higher temperatures, please contact . |
Recommended Products